 POTENTIOSTAT GALVANOSTAT - OGF500 - FOR ELECTROCHEMICAL MEASUREMENT
Description origaFLEX concept Technical Specification Options Brochures The OGF500 is a Potentiostat and Galvanostat measurement channel. Connected to a power supply module (OGFPWR) or a driving module (OGFDRV), the OGF500 is a trully independant channel of 500 mA. Included functions: - Potentiostat
- Galvanostat
- Temperature measurement
- Batteries holders connector
- GND connexion
One potentiostat for TWO possibilitiesThe OrigaFlex range is a multi-channel system, modular Mutli-potentiostats, compact and unique on the market. You can start your system with a single channel and then extend it without limit with an ETHERNET connection. Single-channelMulti-channelTo operate, your single-channel potentiostat must be connected to a power supply or a "pilot" channel With the OGFPWR, you can start with a single channel, with or without an impedance module With an OGFDRV, you can expend your single-channel in a multi-channel, with or without an impedance module. TWO software depending on your useDepending on your configuration, drive your device with OrigaMaster 5 in USB or with OrigaViewer in ETHERNET. Individually, each channel is controlled by USB, via OrigaMaster 5. Simultaneously, each channel is controlled by ETHERNET, via OrigaViewer. PC software OrigaMaster 5The single-channel system is controlled by USB via the OrigaMaster 5 software. PC software OrigaViewerThe multi-channel system is controlled by ETHERNET via the OrigaViewer software. A flexible systemSingle or multi-channel, it is always possible to split your system to obtain many configuration. For example: A multi-channel system => 1 multi-channel system+ 1 single-channel system or A multi-channel system => 1 multi-channel system + 1 single-channel + 1 other single-channel Split a multi-channel system in twoA single-channel OGFPWR + OGF500 + EIS A multi-channel OGFDRV + 4 x OGF500 A flexible system without limitIt is always possible to split but also to expend a single or multi-channel system. With an Ethernet switch, by connecting "pilote channel" OGFDRV, you can have a multi-channel system, multi-potentiostats without limit. Extend a multi-channel systemThe multi-channel system is drived by ETHERNET via OrigaViewer. Example of multi-channel OGFDRV + 5 x OGF500 + 1 x OGFEIS and OGFDRV + 4 x OGF01A + 1 x OGFEIS Compatible and optional modulesImpedance: 10 µHz - 5 MHz OrigaTrod: Rotating Disk Electrode OrigaBox: Speed controller from 100 to 10,000 RPM Low current potentiostat Current range: ±1 pA, ±10 pA, ±100 pA, ±1 nA and ±10 nA. Best current resolution: 30 aA Coin cells holder Temperature sensors included Thickness: 3,2 mm maximum Diameter: 20 mm maximum Other complementary accessories Electrodes Tips Cables Glass cell
Need more informations ? Contact us at +33 9 54 17 56 03 or fill out our form |
